Modem Vodafone Station (for Fixed Internet Cable)
The Vodafone Station modem allows you to use a speed of up to 1 Gbit/s and is used to connect to the Internet if you have cable Internet from Vodafone (exUPC Internet). The modem has a stylish and elegant design designed for homes, home offices or smaller businesses. Indicator lights on the front LED panel indicate the network status. An intuitive user interface and installation guide help you easily set up extreme Wi-Fi performance.
Technical Specifications:
- Cable modem EURO DOCSIS® 3.1 WIFI EMTA.
- 4x Ethernet 10/100/1000 with traffic signaling (4 RJ-45 connectors for Internet access), 2x RJ-11 for telephone, 1x coaxial cable connector.
- Wireless Wi-Fi connection in 2.4 GHz (IEEE 802.11b/g/n) 3x3 MIMO and 5 GHz (IEEE 802.11n/ac) 4x4 MIMO versions transmitting dually (at once). The modem has internal Wi-Fi antennas. The speed of the Internet connection depends on the ordered tariff and local conditions and differs from the maximum speed of the home Wi-Fi network.
- Dimensions: 285 x 106 x 115 mm.
- Modem consumption is 17 to 24 W when switched on.
Downloads:
- Instructions for connecting and using the modem (in Czech only).
- Technical Specifications.
- User guide (in Czech only).
- Declaration of conformity.
You might find it useful:
What is included in the modem package?
- Modem
- Power supply
- Ethernet cable
- Coaxial cable
What do the modem lights mean?
Power
- Glows white - cable modem is on.
Wi-Fi
- Glows white - Wi-Fi is active and transmitting. Press to turn Wi-Fi off and on.
WPS
- It is not lit by default, it lights up if you turn on the WPS function.
Internet
- Steady white light - internet is working.
Phone
- Indicates a landline connection.
What affects if I can get 1Gbps connection speed on my device?
Recommended equipment for optimal speed:
- Quality data cable
- Gigabit Ethernet port/NIC (Network Interface Card)
- Fifth generation Intel(R) Core(TM) i7-5500U Dual Core Processor or equivalent
- Memory 8 GB
- Updated operating system and browser
- When you order the service, we recommend that you use a professional installation from our technician, who will not only plug in the new modem, but also set up the connection for you on your device and make sure that you have everything set up and ready to connect at the highest possible speed.
- Connection speed is affected by other applications running on the computer, antivirus programs and firewalls. Even though our connection will run at full speed, your computer may occasionally "lag" and only use a portion of the available speed.
- The main advantage of gigabit fixed internet is the high capacity of your connection. You can make full use of the connection on various devices (laptops, mobile phones, game consoles, smart TVs, etc.), which will practically not be affected due to the high speed. So you don't have to worry about your smart TV, etc., stopping working when you start a video conference on your laptop.
- If you're connecting to Wi-Fi, Wi-Fi interference (from obstacles on the route or other wireless networks in your area) and your device's features, which may not support the latest Wi-Fi standards, have the biggest impact on connection speed. We therefore do not recommend connecting to a Wi-Fi network to measure the Internet speed, so that the result is not distorted. You will achieve the highest speeds when using a 5 GHz Wi-Fi network with direct line of sight to the modem and at a short distance. Considering the limits of wireless networks, however, it is necessary to take into account that the measured speed may be lower than when connected by a network cable.
How to get into the modem administration and change the login information?
- Log in to the modem's Wi-Fi network or connect over a data cable and enter the address http://192.168.0.1 in the browser.
- To access the administration, use the username admin, the default login password can be found on the label on the modem (in the line Router access (administration address) and Password (default input password)). When logging in for the first time, you can change your password to your own for your own safety. You can later change the password in the administration in the Settings - Password section.
- If you change the password and forget it, you will need to restore the factory settings of the modem using the reset button. You can find the button on the back of the modem, you need to press it for about 25 seconds. Then all settings will be restored - this may take several minutes (max. half an hour). Don't forget that the default login data for the administration as well as the Wi-Fi name and password can be found on the modem label.
How do I turn on Wi-Fi, how can I change the Wi-Fi network name and password?
By default, the Wi-Fi network is turned on, the name of your network (SSID) and password (Wi-Fi Password) can be found on the label on the modem. We have also prepared for you general information on the operation of Wi-Fi networks.
Log in to the modem administration.
Connect to the modem via Wi-Fi or a data cable and enter the address http://192.168.0.1 in the browser. To log in, use the username admin and the password you set, or the default password you can find on the label on the modem.
Go to the Wi-Fi - General menu.
Here you can enable or disable Wi-Fi network broadcasting, edit the broadcast Wi-Fi network name, password and other details. Don't forget to save the changes with the Confirm button.
How do I change the Wi-Fi channel in case of Wi-Fi interference?
Before changing the settings, read the detailed information about the Wi-Fi channels.
Log in to the modem administration.
Connect to the modem via Wi-Fi or a data cable and enter the address http://192.168.0.1 in the browser. To log in, use the username admin and the password you set, or the default password you can find on the label on the modem.
In the upper right scroll bar, choose Expert mode instead of Basic mode.
This will give you access to additional Wi-Fi settings options.
Go to Wi-Fi menu - Wi-Fi radar.
Here you will see which Wi-Fi channels are used by nearby Wi-Fi networks (both in the 2.4 GHz and 5 GHz bands) and which one is used the least. Accordingly, you can select the least disturbed Wi-Fi channel and set it for your Wi-Fi network.
Go to Wi-Fi menu - Settings.
Select the required Wi-Fi channel and save the setting via the Confirm button.
How do I switch the modem to bridge mode?
Switching the modem to bridge mode is especially useful in cases where you want to connect your own router behind the modem or you need to ensure the correct assignment of a fixed IP address to your own device. Your home devices (mobile phones, laptops and others) will then connect to the network created by your own router, which you connect behind the modem. Bridge mode is only available if you have an IP address from us in IPv4 format. If you are currently using IPv6, please contact us to arrange a change. After setting the bridge mode, the default address for modem administration will be changed to http://192.168.100.1.
Log in to the modem administration.
Connect to the modem via Wi-Fi or a data cable and enter the address http://192.168.0.1 in the browser. To log in, use the username admin and the password you set, or the default password you can find on the label on the modem.
Go to the menu Settings - Modem Mode - Routing/NAT.
Switch the routing status to Bridge mode and confirm the changes.
Bridge mode is available in the modem from firmware version 01.04.046.07.EURO.SIP.